Return
Print
Email
3M™ Motor Lead Inline Splice Kit by 3M
- Part Number: 7100017508
- UPC:
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Each kit makes three splices. Lugs are not included in kits. Feeder of 10-4 AWG (6-16 sq mm), motor lead 12-14 AWG (4-16 sq mm).3M Motor Lead Inline Splice Kits 5311 are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splices main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. 3M Scotchlok Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used (not included). Each kit contains: 3 adapter sleeves, 1 inline splice cover, 1 tube of silicone grease and an instruction sheet.
Specifications
Details
Industrial Category:
Electrical Supplies
Industrial Subcategory:
Wire Connectors
Industrial Subtype:
Splice Kits
Application:
Used on Cables with a Rated Operating Temperature of 90 deg C and an Emergency Overload Rating of 130 deg C; to Splice (Insulate and Seal) Motor Lead Connections for 1000V and Less Cables Sized 16 AWG to 500 kcmil
Application/Industry:
Commercial Construction
Cable Shielding:
Single Conductor Non-shielded Cable
Color Family:
Black
Connection Type:
Inline (Non-shielded)
ECCN:
EAR99
Kit Includes:
(3) Adapter Sleeves
Maximum Bolt Length:
1/2 in
Maximum Bolt Length (Metric):
12.7 mm
Maximum Feeder Lead Size:
4 AWG
Maximum Motor Lead Size:
4 AWG
Maximum Operating Voltage:
1 kV
Product Color:
Black
RoHS EU Comments:
RoHS 2011/65/EU compliant without exemption
Splice Cover Inner Diameter:
12-8 AWG: 0.14 in / 8-4 AWG: 0.24 in
Splice Cover Inner Diameter (Metric):
12-8 AWG: 3.6 mm / 8-4 AWG: 6.1 mm
Splice Cover Length:
4-5 in
Splice Cover Length (Metric):
101.6-127.0 mm
Splice Type:
Inline
Unit of Use - Customary Net Weight:
0.4204
Unit of Use - Item Quantity:
1.0
Unit of Use - Item Unit:
KIT
Unit of Use - Total Unit Quantity:
1.0
Unit of Use - Unit:
KIT
Voltage:
1 kV
Manufactured By:
3M
Other Details
Contains all materials required to make three splices (excluding lugs)
Easy Re-entry
Fast and simple installation
No torches or heat source needed to install
Thick walls to resist puncture and abrasion damage