GEARWRENCH engineers designed these cold chisels to cut through metal, especially rivets, bolts, or nuts that you encounter in your professional work. For truly stuck or damaged fasteners, a chisel can provide the only solution; these chisels are available in a range of common sizes. The work ends of these chisels have a precision-hardened point, while the back ends have a softened and tapered design to reduce their chipping potential.
Details
Armstrong to GearWrench Cross References:
Cornwell Cross Reference:
AP32B|1/2"-3/8 Adapter-Ball|;
Craftsman Cross Reference:
9-19494|SOCKET,ADAPT |Yes;
Craftsman Industrial Cross Reference:
Grey Pneumatic Cross Reference:
2228A|1/2" Female x 3/8" Male Adapter w/ Friction Ball|Yes;
Intended Use:
Used to cut through "cold" or unheated metal
JET Cross Reference:
682952|1/2"F X 3/8"M PWR ADAPTER|;
Long Description:
7/16" x 5-1/2" Cold Chisel
Proto Cross Reference:
J7651|SKT IMP ADAP 1/2 F X 3/8|Yes;
Table Description:
7/16" x 5-1/2" Cold Chisel
Unitool Cross Reference:
UT7504|F1/2"X M3/8"-AIR IMPACT ADAPTOR|Yes;
URREA Cross Reference:
7651|1/2 IN DR ADAPTER TO 3/8 IN DR|Yes;
Williams Cross Reference:
4-2A|1/2" Drive Impact Adapter 3/8"Mx1/2"F|Yes;
Wright Cross Reference:
4900|1/2"Fx3/8"M - 1/2" Dr. Impact Adaptor (Ball Lock)|Yes;
Manufactured By:
GearWrench
Other Details
Designed to cut metal, such as wrought iron, steel, brass, or aluminum
For Cutting Rivets, Bolts, and Nuts
Ground surface for ease of identification
Meets or exceeds ASME B107.47
Precision hardened working ends
Softened and tapered striking end reduces the potential to chip