Return

PFERD COMBIDISC® Non-Woven Abrasive Disc, 4" Dia, Type CDR, 100 Grit, Aluminum oxide

PFERD COMBIDISC® Non-Woven Abrasive Disc, 4" Dia, Type CDR, 100 Grit, Aluminum oxide by Pferd Inc.

Part Number: 47202033
UPC:
Availability:

Quantity:

Add To Quote

Add To Estimate

Add To Wishlist

Compare Item

Product Overview

Info & Guides

application/pdf

Designed for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown) The CDR clamping system has a threaded connection with male thread (plastic). Also compatible with the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Specifications

Details

Industrial Category:

Abrasives

Industrial Subcategory:

Abrasive Wheels, Discs and Brushes

Industrial Subtype:

Sanding Discs and Kits

Category Level 4:

Quick Change Discs

Abrasive:

Aluminium oxide A

Applications:

Cleaning

Applications 1:

Deburring

Applications 2:

Step-by-step fine grinding

Applications 3:

Roughening

Applications 4:

Structuring (matt finishing, brush matting and satin finishing)

Applications 5:

Surface work

Applications 6:

Work on weld seams

Clamping System:

CDR system

Country of Origin:

Diameter External (In):

4.00

Drive Types:

Angle grinder

Drive Types 1:

Cordless angle grinder

Drive Types 2:

Flexible shaft drive

Drive Types 3:

Straight grinder

EDP:

43246

Grit Size:

100 G

Item Quantity:

Item Weight (kgs):

MANUFACTURER_TYPE_DESCR:

CDR VRH 100 A G

Materials that can be worked:

Aluminum

Materials that can be worked 1:

Brass

Materials that can be worked 10:

Steel materials with a hardness > 54 HRC

Materials that can be worked 11:

Steels up to 370 HV (< 38 HRC)

Materials that can be worked 12:

Thermoplastics

Materials that can be worked 13:

Titanium

Materials that can be worked 14:

Titanium alloys

Materials that can be worked 2:

Bronze

Materials that can be worked 3:

Cast steel

Materials that can be worked 4:

Cobalt-based alloys

Materials that can be worked 5:

Copper

Materials that can be worked 6:

Fibre-reinforced thermosetting plastics (GRP, CRP)

Materials that can be worked 7:

Hardened, heat-treated steels over 370 HV (38 HRC)

Materials that can be worked 8:

Nickel-based alloys (e.g. Inconell and Hastelloy)

Materials that can be worked 9:

Stainless steel (INOX)

Optimum RPM:

2850 - 4000 RPM

Order Quanityt:

Pferdefficiency:

PFERDEFFICIENCY recommends COMBIDISC® products to reduce disc change and setup times.

Pferdergonomics:

PFERDERGONOMICS recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.

Prop 65:

View

Recommendations for use:

Use COMBIDISC® non-woven discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.

Recommendations for use 1:

Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.

Recommendations for use 2:

Adding oil or water during grinding results in a finer finish, cooler grinding, and longer service life.

Safety notes:

The maximum permitted peripheral speed is 9,800 SFPM.

UNSPNC:

31191506

UPC Code:

97758432467

Manufactured By:

Pferd Inc.

Other Details

Convenient to use due to simple handling and low-vibration working.

No operational disruptions caused by sticking, slipping, or disengaging.

Reduced down time due to quick changes.