Return

PFERD M-BRAD® End Brush - Banded 1" Dia. .040/80 Grit Ceramic Oxide 1/4" Shank

PFERD M-BRAD® End Brush - Banded 1" Dia. .040/80 Grit Ceramic Oxide 1/4" Shank by Pferd Inc.

Part Number: 79184310
UPC:
Availability:

Quantity:

Add To Quote

Add To Estimate

Add To Wishlist

Compare Item

Product Overview

Designed for light brushing such as deburring, cleaning and derusting. Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Platstic filaments are temperature-resistant up to 410°F.

Specifications

Details

Industrial Category:

Abrasives

Industrial Subcategory:

Abrasive Wheels, Discs and Brushes

Industrial Subtype:

Abrasive Brushes

Category Level 4:

End Brushes

Applications:

Cleaning

Applications 1:

Deburring

Applications 2:

Structuring (matt finishing, brush matting and satin finishing)

Country of Origin:

Diameter Cup (In):

1.13

Diameter External (In):

1.00

Diameter Filament Material (In):

0.04

Diameter Shank:

1/4 Inch

Drive Types:

Flexible shaft drive

Drive Types 1:

Power drill

Drive Types 2:

Straight grinder

EDP:

84310

Filament Material:

Ceramic oxide grain (CO)

Filament To Ring Length:

0.50

Grit Size:

Item Quantity:

Item Weight (kgs):

0.083

MANUFACTURER_TYPE_DESCR:

1" M-BRAD END .040 CO 80 BANDED

Materials that can be worked:

Aluminum

Materials that can be worked 1:

Bronze

Materials that can be worked 10:

Soft titanium alloys (tensile strength 500 N/mm²)

Materials that can be worked 11:

Steel, cast steel

Materials that can be worked 12:

Steel materials with a hardness > 54 HRC

Materials that can be worked 13:

Steels up to 370 HV (< 38 HRC)

Materials that can be worked 14:

Titanium

Materials that can be worked 15:

Titanium alloys

Materials that can be worked 2:

Cast iron

Materials that can be worked 3:

Cast steel

Materials that can be worked 4:

Cobalt-based alloys

Materials that can be worked 5:

Hard non-ferrous metal

Materials that can be worked 6:

High-temperature-resistant materials

Materials that can be worked 7:

Nickel-based alloys (e.g. Inconell and Hastelloy)

Materials that can be worked 8:

Nickel or titanium-based superalloys

Materials that can be worked 9:

Other non-ferrous metals

Mounting System:

Shank

Optimum RPM:

5200 - 9000 RPM

Order Quanityt:

Recommendations for use:

Please observe the recommended rotational speeds.

Recommendations for use 1:

Use coolant for applications where large amounts of heat are produced.

Recommendations for use 2:

For best performance, use a power tool with a minimum output of 300 watts.

Recommendations for use 3:

Remove the bridle once the filament is worn down. Then the rest of the filament can be used.

Recommendations for use 4:

Remove the bridle before starting work if you would like to ensure particularly flexible working, achieve a large spreading diameter or access hard-to-reach areas.

Safety notes:

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Trim Length (In):

1.00

UNSPNC:

31191521

Manufactured By:

Pferd Inc.

Other Details

Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour.

Optimal access to hard-to-reach areas such as recesses and drilled holes.

The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled.

The bridle prevents the wires spreading out sideways.