Return

PFERD M-BRAD® Mounted Wheel Brush 2" Dia. Narrow Face .022/120 CO 1/4" Shank

PFERD M-BRAD® Mounted Wheel Brush 2" Dia. Narrow Face .022/120 CO 1/4" Shank by Pferd Inc.

Part Number: 79184203
UPC:
Availability:

Quantity:

Add To Quote

Add To Estimate

Add To Wishlist

Compare Item

Product Overview

Info & Guides

application/pdf

Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Platstic filaments are temperature-resistant up to 410°F.

Specifications

Details

Industrial Category:

Abrasives

Industrial Subcategory:

Abrasive Wheels, Discs and Brushes

Industrial Subtype:

Abrasive Brushes

Category Level 4:

Wire Wheel Brushes

Applications:

Cleaning

Applications 1:

Deburring

Applications 2:

Structuring (matt finishing, brush matting and satin finishing)

Country of Origin:

Diameter External (In):

2.00

Diameter Filament Material (In):

0.02

Diameter Shank:

1/4 Inch

Drive Types:

Flexible shaft drive

Drive Types 1:

Power drill

Drive Types 2:

Straight grinder

EDP:

84203

Filament Material:

Ceramic oxide grain (CO)

Grit Size:

120

Item Quantity:

Item Weight (kgs):

0.018

MANUFACTURER_TYPE_DESCR:

RBU 5004/6,35 CO 120 0,55

Materials that can be worked:

Aluminum

Materials that can be worked 1:

Bronze

Materials that can be worked 10:

Soft titanium alloys (tensile strength 500 N/mm²)

Materials that can be worked 11:

Steel, cast steel

Materials that can be worked 12:

Steel materials with a hardness > 54 HRC

Materials that can be worked 13:

Steels up to 370 HV (< 38 HRC)

Materials that can be worked 14:

Titanium

Materials that can be worked 15:

Titanium alloys

Materials that can be worked 2:

Cast iron

Materials that can be worked 3:

Cast steel

Materials that can be worked 4:

Cobalt-based alloys

Materials that can be worked 5:

Hard non-ferrous metal

Materials that can be worked 6:

High-temperature-resistant materials

Materials that can be worked 7:

Nickel-based alloys (e.g. Inconell and Hastelloy)

Materials that can be worked 8:

Nickel or titanium-based superalloys

Materials that can be worked 9:

Other non-ferrous metals

Mounting System:

Shank

Optimum RPM:

6000 - 9800 RPM

Order Quanityt:

Packaging:

Industrial packaging

Prop 65:

View

Recommendations for use:

Please observe the recommended rotational speeds.

Recommendations for use 1:

Use coolant for applications where large amounts of heat are produced.

Recommendations for use 2:

For best performance, use a power tool with a minimum output of 300 watts.

Safety notes:

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Trim Length (In):

0.50

UNSPNC:

31191521

Manufactured By:

Pferd Inc.

Other Details

Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Highly flexible, enabling optimal adaptation to the workpiece contour.