Return
Print
Email
![PFERD M-BRAD® Mounted Wheel Brush 3" Dia. Narrow Face .040/80 Ceramic Oxide 1/4" Shank](/vendors/6924/large/79184208-rgb.png "PFERD M-BRAD® Mounted Wheel Brush 3" Dia. Narrow Face .040/80 Ceramic Oxide 1/4" Shank")
PFERD M-BRAD® Mounted Wheel Brush 3" Dia. Narrow Face .040/80 Ceramic Oxide 1/4" Shank by Pferd Inc.
- Part Number: 79184208
- UPC:
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Platstic filaments are temperature-resistant up to 410°F.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Industrial Subtype:
Abrasive Brushes
Category Level 4:
Wire Wheel Brushes
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Structuring (matt finishing, brush matting and satin finishing)
Country of Origin:
US
Diameter External (In):
3.00
Diameter Filament Material (In):
0.04
Diameter Shank:
1/4 Inch
Drive Types:
Flexible shaft drive
Drive Types 1:
Power drill
Drive Types 2:
Straight grinder
EDP:
84208
Filament Material:
Ceramic oxide grain (CO)
Grit Size:
80
Item Quantity:
1
Item Weight (kgs):
0.041
MANUFACTURER_TYPE_DESCR:
RBU 8008/6,35 CO 80 1,00
Materials that can be worked:
Aluminum
Materials that can be worked 1:
Bronze
Materials that can be worked 10:
Soft titanium alloys (tensile strength 500 N/mm²)
Materials that can be worked 11:
Steel, cast steel
Materials that can be worked 12:
Steel materials with a hardness > 54 HRC
Materials that can be worked 13:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 14:
Titanium
Materials that can be worked 15:
Titanium alloys
Materials that can be worked 2:
Cast iron
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Cobalt-based alloys
Materials that can be worked 5:
Hard non-ferrous metal
Materials that can be worked 6:
High-temperature-resistant materials
Materials that can be worked 7:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 8:
Nickel or titanium-based superalloys
Materials that can be worked 9:
Other non-ferrous metals
Mounting System:
Shank
Optimum RPM:
4800 - 7800 RPM
Order Quanityt:
50
Packaging:
Industrial packaging
Prop 65:
View
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 2:
For best performance, use a power tool with a minimum output of 300 watts.
Safety notes:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Trim Length (In):
0.75
UNSPNC:
31191521
Manufactured By:
Pferd Inc.
Other Details
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Highly flexible, enabling optimal adaptation to the workpiece contour.