Return
Print
Email
![PFERD M-BRAD® Wheel Brush 4" Dia Narrow Face .022/120 Grit CO 5/8-1/2" Arbor](/vendors/6924/large/79184226-rgb.png "PFERD M-BRAD® Wheel Brush 4" Dia Narrow Face .022/120 Grit CO 5/8-1/2" Arbor")
PFERD M-BRAD® Wheel Brush 4" Dia Narrow Face .022/120 Grit CO 5/8-1/2" Arbor by Pferd Inc.
- Part Number: 79184226
- UPC:
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Platstic filaments are temperature-resistant up to 410°F. Excellent for medium-duty hand-held or automated brushing of large workpieces.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Industrial Subtype:
Abrasive Brushes
Category Level 4:
Wire Wheel Brushes
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Structuring (matt finishing, brush matting and satin finishing)
Country of Origin:
US
Diameter Arbor Hole With Adapter:
1/2 Inch
Diameter External (In):
4.00
Diameter Filament Material (In):
0.02
Diameter Hole:
1/2 Inch
Drive Types:
Bench grinder
Drive Types 1:
Flexible shaft drive
Drive Types 2:
Straight grinder
EDP:
84226
Filament Material:
Ceramic oxide grain (CO)
Grit Size:
120
Installation Width (In):
0.75
Item Quantity:
1
Item Weight (kgs):
0.145
MANUFACTURER_TYPE_DESCR:
4" NF M-BRAD WHL .022/120 CO 5/8-1/2" AH
Materials that can be worked:
Aluminum
Materials that can be worked 1:
Bronze
Materials that can be worked 10:
Soft titanium alloys (tensile strength 500 N/mm²)
Materials that can be worked 11:
Steel, cast steel
Materials that can be worked 12:
Steel materials with a hardness > 54 HRC
Materials that can be worked 13:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 14:
Titanium
Materials that can be worked 15:
Titanium alloys
Materials that can be worked 2:
Cast iron
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Cobalt-based alloys
Materials that can be worked 5:
Hard non-ferrous metal
Materials that can be worked 6:
High-temperature-resistant materials
Materials that can be worked 7:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 8:
Nickel or titanium-based superalloys
Materials that can be worked 9:
Other non-ferrous metals
Mounting System:
Centre hole
Optimum RPM:
3000 - 5000 RPM
Order Quanityt:
10
Prop 65:
View
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Trim Length (In):
0.75
UNSPNC:
31191521
Manufactured By:
Pferd Inc.
Other Details
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Can be used with all common stationary drive systems and bench grinders.
Highly flexible, enabling optimal adaptation to the workpiece contour.
The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.