Return
Print
Email
![PFERD Miniature Cup Brush 9/16" Dia. .005 Carbon Steel](/vendors/6924/large/79183236-rgb.png "PFERD Miniature Cup Brush 9/16" Dia. .005 Carbon Steel")
PFERD Miniature Cup Brush 9/16" Dia. .005 Carbon Steel by Pferd Inc.
- Part Number: 79183236
- UPC: 04007220046319
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
Designed for light brushing such as deburring, cleaning and polishing. Ideal for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece. PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Industrial Subtype:
Abrasive Brushes
Category Level 4:
Cup Brushes
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Derusting
Applications 3:
Removing oxide layers
Applications 4:
Paint stripping
Applications 5:
Roughening
Country of Origin:
US
Customs Number:
9603500000
Diameter External (In):
0.56
Diameter Filament Material (In):
0.01
Diameter Shank:
1/8 Inch
Drive Types:
Flexible shaft drive
Drive Types 1:
Straight grinder
EAN:
4007220046319
EDP:
83236
Filament Material:
Steel wire (ST)
Item Quantity:
36
Item Weight (kgs):
0.003
MANUFACTURER_TYPE_DESCR:
TBU 1803/3,18 ST 0,12
Materials that can be worked:
Cast iron
Materials that can be worked 1:
Cast steel
Materials that can be worked 2:
Thermosetting plastics
Materials that can be worked 3:
Elastomers
Materials that can be worked 4:
Steel, cast steel
Materials that can be worked 5:
Steel materials with a hardness > 54 HRC
Materials that can be worked 6:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 7:
Thermoplastics
Materials that can be worked 8:
Wood
Mounting System:
Shank
Optimum RPM:
5000 - 15000 RPM
Order Quanityt:
10
Prop 65:
View
Recommendations for use:
Please observe the recommended rotational speeds.
Safety notes:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Trim Length (In):
0.25
UNSPNC:
27111907
Manufactured By:
Pferd Inc.
Other Details
Creates fine surfaces.
Highly flexible, enabling optimal adaptation to the workpiece contour.
Long service life through use of PFERD special wire.
Maximum precision and efficiency on delicate workpieces.