Return
Print
Email
![PFERD POLINOX® Unitized Disc, 4-1/2" x 1/2 x 5/8-11, T27, Fine, MH,6SF,Silicon carbide](/vendors/6924/large/47802695-rgb.png "PFERD POLINOX® Unitized Disc, 4-1/2" x 1/2 x 5/8-11, T27, Fine, MH,6SF,Silicon carbide")
PFERD POLINOX® Unitized Disc, 4-1/2" x 1/2 x 5/8-11, T27, Fine, MH,6SF,Silicon carbide by Pferd Inc.
- Part Number: 47802695
- UPC: 04007220867433
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
POLINOX® unitized discs are used for face-down grinding with variable speed angle grinders. Ideal for larger surfaces. The compressed, non-woven material is bonded to a fiberglass back. POLINOX® unitized discs are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain, and the appropriate bond create non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing. Medium-hard version with increased edge strength and service life for coarse deburring and cleaning applications.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Polishing, Finishing and Conditioning
Industrial Subtype:
Unitized Non-Woven Wheels
Abrasive:
Silicon carbide SiC
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Step-by-step fine grinding
Applications 3:
Roughening
Applications 4:
Structuring (matt finishing, brush matting and satin finishing)
Applications 5:
Surface work
Country of Origin:
IT
Diameter External (In):
4.50
Diameter Thread:
5/8-11
Drive Types:
Angle grinder
Drive Types 1:
Cordless angle grinder
EAN:
4007220867433
EDP:
48494
Grit Size:
fine
Item Quantity:
5
Item Weight (kgs):
0.101
MANUFACTURER_TYPE_DESCR:
DISC PNER-MH 115-22,2 C FEIN HUB
Materials that can be worked:
Aluminum
Materials that can be worked 1:
Brass
Materials that can be worked 10:
Steel materials with a hardness > 54 HRC
Materials that can be worked 11:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 12:
Thermoplastics
Materials that can be worked 13:
Titanium
Materials that can be worked 14:
Titanium alloys
Materials that can be worked 15:
Zinc
Materials that can be worked 2:
Bronze
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Cobalt-based alloys
Materials that can be worked 5:
Copper
Materials that can be worked 6:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 9:
Stainless steel (INOX)
Order Quanityt:
60
Pferdergonomics:
PFERDERGONOMICS recommends POLINOX® grinding discs to reduce vibration and noise produced during use and to improve comfort when working.
Prop 65:
View
Recommendations for use:
Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.
Recommendations for use 1:
For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
Safety notes:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Specification:
6SF
UNSPNC:
31191506
UPC Code:
97758484947
Version:
MH (medium-hard)
Manufactured By:
Pferd Inc.
Other Details
Can be profiled as desired, enabling optimal adjustment to the contour.
Cost-effective due to high abrasive performance and durability.
Produces very good surface quality.