Return

PFERD POLINOX® Unitized Wheel, 5" x 1/4 x 7/8, Fine, Hard, 8AM, Aluminum oxide

PFERD POLINOX® Unitized Wheel, 5" x 1/4 x 7/8, Fine, Hard, 8AM, Aluminum oxide by Pferd Inc.

Part Number: 44691052
UPC: 04007220833162
Availability:

Quantity:

Add To Quote

Add To Estimate

Add To Wishlist

Compare Item

Product Overview

Info & Guides

application/pdf

POLINOX® unitized wheels are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products that create very good surface finishes and have high stock removal rate and long service life. These properties come into play especially when deburring, blending, finishing, and polishing soft metals, alloyed and high-alloy steels, as well as titanium alloys. This version for angle grinders and fillet weld grinders is designed for working on fillet welds and hard-to-reach slots and indentations. Hard version with very high stock removal rate, good edge strength, and long service life for tough deburring and polishing applications.

Specifications

Details

Industrial Category:

Abrasives

Industrial Subcategory:

Polishing, Finishing and Conditioning

Industrial Subtype:

Unitized Non-Woven Wheels

Abrasive:

Aluminium oxide A

Applications:

Cleaning

Applications 1:

Deburring

Applications 2:

Step-by-step fine grinding

Applications 3:

Roughening

Applications 4:

Structuring (matt finishing, brush matting and satin finishing)

Applications 5:

Surface work

Country of Origin:

Diameter External (In):

5.00

Diameter Hole:

7/8 Inch

Drive Types:

Angle grinder

Drive Types 1:

Cordless angle grinder

EAN:

4007220833162

EDP:

48358

Grit Size:

fine

Item Quantity:

Item Weight (kgs):

0.064

MANUFACTURER_TYPE_DESCR:

PNER-H 12506-22,2 A F

Materials that can be worked:

Aluminum

Materials that can be worked 1:

Brass

Materials that can be worked 10:

Steel materials with a hardness > 54 HRC

Materials that can be worked 11:

Steels up to 370 HV (< 38 HRC)

Materials that can be worked 12:

Thermoplastics

Materials that can be worked 13:

Titanium

Materials that can be worked 14:

Titanium alloys

Materials that can be worked 15:

Zinc

Materials that can be worked 2:

Bronze

Materials that can be worked 3:

Cast steel

Materials that can be worked 4:

Cobalt-based alloys

Materials that can be worked 5:

Copper

Materials that can be worked 6:

Fibre-reinforced thermosetting plastics (GRP, CRP)

Materials that can be worked 7:

Hardened, heat-treated steels over 370 HV (38 HRC)

Materials that can be worked 8:

Nickel-based alloys (e.g. Inconell and Hastelloy)

Materials that can be worked 9:

Stainless steel (INOX)

Order Quanityt:

Pferdergonomics:

PFERDERGONOMICS recommends POLINOX® unitized wheels to reduce vibration, noise and dust produced during use and to improve comfort when working.

Prop 65:

View

Recommendations for use:

Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.

Recommendations for use 1:

For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Safety notes:

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Specification:

8AM

UNSPNC:

31191600

UPC Code:

97758483582

Version:

H (hard)

Manufactured By:

Pferd Inc.

Other Details

Can be profiled as desired, enabling optimal adjustment to the contour.

Cost-effective due to high abrasive performance and durability.

Produces very good surface quality.