Return
Print
Email
![PFERD POLINOX® Unitized Wheel, 6" x 1/8 x 1, Fine, Medium-Hard, 3SF, Silicon carbide](/vendors/6924/large/pner-mh-15003-25-4-sic-f-rgb.png "PFERD POLINOX® Unitized Wheel, 6" x 1/8 x 1, Fine, Medium-Hard, 3SF, Silicon carbide")
PFERD POLINOX® Unitized Wheel, 6" x 1/8 x 1, Fine, Medium-Hard, 3SF, Silicon carbide by Pferd Inc.
- Part Number: 44691629
- UPC: 04007220895726
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
POLINOX® unitized wheels are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products that create very good surface finishes and have high stock removal rate and long service life. These properties come into play especially when deburring, blending, finishing, and polishing soft metals, alloyed and high-alloy steels, as well as titanium alloys. This version for angle grinders and fillet weld grinders is designed for working on fillet welds and hard-to-reach slots and indentations. Medium-hard version with increased edge strength and service life for coarse deburring and cleaning applications.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Polishing, Finishing and Conditioning
Industrial Subtype:
Unitized Non-Woven Wheels
Abrasive:
Silicon carbide SiC
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Step-by-step fine grinding
Applications 3:
Roughening
Applications 4:
Structuring (matt finishing, brush matting and satin finishing)
Applications 5:
Surface work
Country of Origin:
DE
Diameter External (In):
6.00
Diameter Hole:
1 Inch
Drive Types:
Angle grinder
Drive Types 1:
Cordless angle grinder
EAN:
4007220895726
EDP:
48361
Grit Size:
fine
Item Quantity:
5
Item Weight (kgs):
0.053
MANUFACTURER_TYPE_DESCR:
PNER-MH 15003-25,4 SiC F
Materials that can be worked:
Aluminum
Materials that can be worked 1:
Brass
Materials that can be worked 10:
Steel materials with a hardness > 54 HRC
Materials that can be worked 11:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 12:
Thermoplastics
Materials that can be worked 13:
Titanium
Materials that can be worked 14:
Titanium alloys
Materials that can be worked 15:
Zinc
Materials that can be worked 2:
Bronze
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Cobalt-based alloys
Materials that can be worked 5:
Copper
Materials that can be worked 6:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 9:
Stainless steel (INOX)
Order Quanityt:
60
Pferdergonomics:
PFERDERGONOMICS recommends POLINOX® unitized wheels to reduce vibration, noise and dust produced during use and to improve comfort when working.
Prop 65:
View
Recommendations for use:
Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.
Recommendations for use 1:
For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
Recommendations for use 2:
Grinding wheels with a 6-inch diameter can also be used on bench grinders, such as for reworking surgical instruments.
Safety notes:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Specification:
6SF
UNSPNC:
31191600
UPC Code:
97758483612
Version:
MH (medium-hard)
Manufactured By:
Pferd Inc.
Other Details
Can be profiled as desired, enabling optimal adjustment to the contour.
Cost-effective due to high abrasive performance and durability.
Produces very good surface quality.