Details
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Applications 2:
Step-by-step fine grinding
Applications 4:
Structuring (matt finishing, brush matting and satin finishing)
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steel materials with a hardness > 54 HRC
Materials that can be worked 11:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 9:
Recommendations for use:
For the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.
Safety notes:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Manufactured By:
Pferd Inc.
Other Details
Conforms to contours due to high flexibility.
Cost-effective due to high abrasive performance and durability.
Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.