Return

PFERD Spiral Band, 1-1/8" x 1-1/8,Cylindrical Shape,150 Grit,Zirconia aluminuma Z-COOL

PFERD Spiral Band, 1-1/8" x 1-1/8,Cylindrical Shape,150 Grit,Zirconia aluminuma Z-COOL by Pferd Inc.

Part Number: 42209285
UPC: 04007220148273
Availability:

Quantity:

Add To Quote

Add To Estimate

Add To Wishlist

Compare Item

Product Overview

Info & Guides

application/pdf

For coarse grinding work with a high stock removal rate and cool grinding. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bands

Specifications

Details

Industrial Category:

Abrasives

Industrial Subcategory:

Polishing, Finishing and Conditioning

Industrial Subtype:

Spiral Bands

Abrasive:

Zirconia alumina Z-COOL

Applications:

Deburring

Applications 1:

Step-by-step fine grinding

Applications 2:

Leveling

Applications 3:

Roughening

Applications 4:

Sharpening

Applications 5:

Surface work

Applications 6:

Work on weld seams

Applications 7:

Working on edges

Country of Origin:

Diameter External (In):

1.17

Drive Types:

Flexible shaft drive

Drive Types 1:

Straight grinder

EAN:

4007220148273

EDP:

41418

Grit Size:

150

Item Quantity:

100

Item Weight (kgs):

0.004

MANUFACTURER_TYPE_DESCR:

GSB 3030 Z-COOL 150

Materials that can be worked:

Annealed cast iron

Materials that can be worked 1:

Bronze

Materials that can be worked 10:

Titanium

Materials that can be worked 11:

Titanium alloys

Materials that can be worked 2:

Cast steel

Materials that can be worked 3:

Cobalt-based alloys

Materials that can be worked 4:

Grey/nodular cast iron (GG/GJL, GGG/GJS)

Materials that can be worked 5:

Hardened, heat-treated steels over 370 HV (38 HRC)

Materials that can be worked 6:

Nickel-based alloys (e.g. Inconell and Hastelloy)

Materials that can be worked 7:

Stainless steel (INOX)

Materials that can be worked 8:

Steel materials with a hardness > 54 HRC

Materials that can be worked 9:

Steels up to 370 HV (< 38 HRC)

Optimum RPM:

13000 - 19100 RPM

Order Quanityt:

Prop 65:

View

Recommendations for use:

To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.

Recommendations for use 1:

To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.

Recommendations for use 2:

For the best performance, use with a recommended peripheral speed of 4,000-6,000 SFPM.

Recommendations for use 3:

Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.

Safety notes:

The maximum permitted peripheral speed is 6,000 SFPM.

Safety notes 1:

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Safety notes 2:

Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.

UNSPNC:

23131508

UPC Code:

97758414180

Manufactured By:

Pferd Inc.

Other Details

Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.

Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.

Outstanding service life even under the toughest work conditions, due to special manufacturing.